|
Eazee Coat Single Component Waterbased Acrylic Waterproof Coating
Perma Eazee Coat is a milky white liquid which can be brush applied to most structural surfaces to make them waterproof. The coating is UV stable and highly flexible. Primary use
- Perma Eazee Coat is used for waterproofing all types of RCC surfaces such as roofs chajjas, parapet walls and external walls. Asbestos cement sheets roofs can also be waterproofed using scrim cloth the junction, overlaps and J- bolts as reinforcement.
- As a damp proof course applied under the first layer of bricks horblocks in masonry works.
Advantages
- Eazee coat is applied directly from the can.
- Eazee Coat cures to give a permanently flexible and resilient surface resistant to a wide range of temperatures.
- No cleaning solvents are required and can be washed off with water when it is still wet.
- Single component and easily brush applied.
- Can be used on wet surfaces and during rainy season.
- Mechanical damages to the membrane can easily be repaired by spot application.
- The membrane allows the concrete surface to breath.
- Seamless application no joints are required.
Directions for use Waterproofing normal concrete Clean the surface to remove all loose particles and any deleterious matter. Repair all cracks, honeycombs and blemishes from the concrete surface. Brush-apply Eazee Coat primer on the entire surface liberally. Primer is prepared by diluting one part by volume of Eazee Coat with one volume of water. When the primer coat is just dry apply the second coat running the brush perpendicular to the first coat. Provide fibre-glass or scrim fabric at junctions of vertical and horizontal surfaces after one coat then apply the second coat. On asbestos sheet roofing Provide scrim or fibre glass fabric at J bolts and junction of sheets over one coat of bitu Coat and then brush apply Eazee Coat on the entire surface in two coats. Damp proof course On the cleaned plinth apply two coats of Eazee Coat. The second coat applied after about four hours of the first coat. When the second coat is still wet blind it with clean sharp sand to provide mechanical key. Note Stir the material well in the container before use. Properties
- Form: Milky White Liquid
- Specific Gravity: 1.34@ 25oC
- PH: 9 +1
- Service Temperature: -10oC to 50oC
- Application Temperature: +5o C to 40oC
- Viscosity: 1500CP+/-100
- Over all Coverage: 25Sq Ft/kg
Packing
Perma Eazee Coat is supplied in 1.5 kg and 15 kg packs.
Shelf Life
Perma Eazee has a shelf life of 9 months if stored in manufacturer's original packing in a cool and dry place away from moisture and heat.
Quality Assurance
All "Perma" branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behavior of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma Staff or Distributor.
Statement of Responsibility
Perma branded products when used in accordance with its current published direction for use per forms as per its data sheet/catalog. The manufacturer and the Distributor will not be responsible for other materials and conditions of inferior workmanship.
|
